Wall Type Suitability
Choose the right installation method for your wall to ensure stability.
| Wall Surface | Adhesive (No-Drill) | Drill-Based |
|---|---|---|
| Smooth Tile / Marble | ● Recommended | ○ Optional |
| Glass / Metal | ● Recommended | ✖ No |
| Solid Wood | ● Recommended | ● Recommended |
| Painted Wall (Latex) | ▲ Not Advised* | ● Recommended |
| Wallpaper / Wallcloth | ✖ Prohibited | ● Recommended |
| Plaster / Concrete | ✖ Not Suitable | ● Recommended |
Note: *Adhesive may peel off paint layers. For painted walls, drilling is always preferred for safety.
Installation Methods
Option A: Adhesive-Based
Wipe the wall with alcohol or a dry cloth. The surface must be bone-dry and oil-free.
Apply the high-strength adhesive evenly on the back. Avoid the edges to prevent overflow.
Press firmly for 30 seconds. Use auxiliary stickers to hold the unit in place.
Wait 72 hours for the adhesive to fully cure before placing any items.
Option B: Drill-Based
Use a spirit level and tape to mark the exact drilling points horizontally.
Select the correct drill bit for your wall type (e.g., 6mm for most masonry).
Insert anchors, then tighten screws until the unit is flush and rigid against the wall.
Final Styling
Apply gentle pressure to ensure the unit is stable before placing fragile objects.
Arrange your essentials to complete your parallel living space.
Removal Tip
To remove adhesive, heat the area with a hair dryer for 3–5 minutes to soften the bond, then gently pry it off.